home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.19941221-19950208
/
000067_news@columbia.edu_Mon Jan 2 17:08:45 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-07-31
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA02805
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Mon, 2 Jan 1995 12:08:47 -0500
Received: by apakabar.cc.columbia.edu id AA17616
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Mon, 2 Jan 1995 12:08:46 -0500
Path: news.columbia.edu!watsun.cc.columbia.edu!fdc
From: fdc@watsun.cc.columbia.edu (Frank da Cruz)
Newsgroups: comp.protocols.kermit.misc
Subject: Re: smartcomm script! wanted
Date: 2 Jan 1995 17:08:45 GMT
Organization: Columbia University
Lines: 22
Message-Id: <3e9but$h6e@apakabar.cc.columbia.edu>
References: <D1rHC0.Gs8@freenet.carleton.ca>
Nntp-Posting-Host: watsun.cc.columbia.edu
Apparently-To: kermit.misc@watsun.cc.columbia.edu
In article <D1rHC0.Gs8@freenet.carleton.ca>,
Simon C.Hall <be946@FreeNet.Carleton.CA> wrote:
>Hi can you help me eith getting a hayes smartcom 14400 card to work under
>kermit?
>I tried a few scripts from the beta 17 but could not get the card to
>acknowledge kermit
>
Did you try ULTRA144.SCR? That one is for Hayes Ultra 14400 bps modems,
tested successfully on external models. Evidently you have an internal
modem. First you have to give a SET PORT command to tell Kermit which
port it's on, in case it is not on COM1. If you did that and it still
doesn't work, then all the cautions about address and interrupt conflicts
apply.
Please read Section 6, "Troubleshooting MS-DOS Kermit Serial Port and Modem
Problems", in the KERMIT.BWR file.
By the way, an easy way to debug dialing troubles is to simply CONNECT to
the port and type AT commands to the modem yourself. You don't *have* to
use dialing scripts to dial.
- Frank